LCD-Shop.lv

The AT33Mono is made specifically for use on mono systems. It has a horizontal coil, and so in principle only generates electricity horizontally. 

The AT33Mono produces sound to a very high quality because it does not easily pick up unnecessary strain components from distorted or scratched records, producing audio that you couldn't possibly get from a stereo cartridge. 

The AT33Mono also has appropriate compliance in the vertical direction, so will not cause damage to stereo records. Enjoy those well-known classic mono records of yesteryear with the AT33Mono.

• Mono cartridge compatible with stereo playback systems.
• Elliptical stylus chip and hard duralumin cantilever.
• 10O middle impedance specification.
• PCOCC coil prevents crystal gain boundary formation (in transmission direction).
• Strong body stabilized by a rigid body set-up.
• "Hanenite" anti-vibration rubber eliminates unnecessary vibrations.
• High-quality sound / Brass fastening screw.

*This model is not compatible with SP records.

• Type: MC-type
• Playback frequency range: 20-20,000Hz
• Output voltage: 0.35mV (1kHz and 5cm/sec. horizontal signal)
• Horizontal/vertical output ratio: 30dB (1kHz)
• Output balance: 1.0dB (1kHz)
• Stylus pressure: 2.3-2.7g (2.5g standard)
• Coil impedance: 10O1kHz
• DC resistance: 10O
• Load resistance: More than 100O(when head amp connected)
• Coil impedance: 28µH (1kHz)
• Static compliance: 20×10-6cm/dyne
• Dynamic compliance: 6×10-6cm/dyne (100Hz)
• Needle shape: Round needle (0.65mil)
• Cantilever: Duralumin pipe
• Vertical tracking angle: 23°
• Dimensions: H16×W16.6×D26.5mm
• Weight: 6.9g
• Accessories: Non-magnetic screwdriver x1, Washers x2, Protector x1, Cartridge fastening screw 13mm×2, 19mm×2, Nut x2, Brush x1, PCOCC lead set x1